The basic principle of grinding in the processing of precision mechanical parts

In precision mechanical parts processing, we must first work out the processing of mechanical parts, to ensure that every link is normal. In precision mechanical parts processing, grinding is used to produce and process a variety of metal materials and metal materials, capable of the floor plan, internal and external cylindrical surface and its cones decent production and processing.
The whole process of grinding can be done by the grinding grain of mineral acid according to the research equipment to carry out micro-analysis drilling of steel parts, including complex physics and organic chemistry of the comprehensive effect. Because the raw material of the research equipment is softer than the raw material of the steel part under study, the grinding particles in the abrasive are placed on the surface of the research equipment or fluctuations, forming a multi-edged substation, in the research equipment and steel parts to do grinding fitness exercise, under the pressure of work, the surface of the steel parts to carry out micro-analysis drilling.
When chromium oxide, polyether or other abrasives are selected, the surface of the steel will produce a thin layer of air oxide film, which is very easy to grind off, in the grinding process of air oxide film is constantly rapidly produced, and continuously by the plant grinding, thus accelerating the grinding process, so that roughness is reduced.
The passivated grain is squeezed and molded on the surface of the steel part, causing deformation caused by the raw materials produced and processed, and the surface peaks and valleys of the steel part tend to be flattened in plastic deformation or cold hardened in constant deformation, resulting in small cuts to the rupture.